DES Home > EMQ Home > CHEM services > Dangerous Goods Storage - Training Providers, Consultants, Equipment Suppliers
Dangerous Goods Storage - Training Providers, Consultants, Equipment Suppliers
Disclaimer
The following information is provided by CHEM Services as a free service to industry. The Department of Emergency Services (DES) does not endorse the companies/organisations listed below. Also DES provides no assurance as to the quality of the courses/services/goods listed.
Training Providers:
- Abate Risk
- AMOG Consulting
- Australasian Institute of Dangerous Goods Consultants (AIDGC)
- Australian Safety and Learning Systems (ASLS)
- CSM Safety Services Pty Ltd
- Dangerous Goods Equipment and Training Pty Ltd
- Environmental Risk Solutions (ERS)
- EPEE Consulting Services
- ERM Risk
- Fire Industries Response Equipment and Services (FIRES)
- Haz-Stor Australia Pty Ltd
- Kimberley Consultants
- Lloyd's Register - Safety and Risk
- ModuSpec Australia Pty Ltd
- MOXI / Skill + Learning
- National Safety Council of Australia Ltd (NSCA)
- Noel Arnold and Associates Pty Ltd
- Parsons Brinckerhoff
- PCT Engineers Pty Ltd
- Peta Lywood Dangerous Goods Consulting
- Plastics and Chemical Industries Association (PACIA)
- QEST Consulting Group
- Robert Jorgensen of RKEJ
- Safety Resource Centre
- Sherpa Consulting
- Simtars
- Sinclair Knight Merz
- TfA Project Group
Abate Risk
Abate Risk is a Health and Safety Consultancy specialising in Dangerous Goods issues. The team includes consultants who helped to establish the Major Hazards Division in Victoria, formed after the Longford gas explosion.
ABATE RISK offers the following services:
- Risk Assessments
- Safety Case
- Safety Management Systems
- Emergency Response training
- First-aid
- Incident/near-miss investigation
- Audits
Contact: For further information contact Michael Marsh on 0408 723389 or abaterisk@telstra.com.au
AMOG Consulting
- An Australian engineering consultancy offering clients a range of highly-developed, specialist skills in concept development, risk and safety engineering and management, numerical and scale modelling, oil spill response planning, naval architecture, structural and hydrodynamic engineering, subsea, coastal and offshore engineering, environmental assessment and modelling of environmental processes, and advanced analysis.
- Provide independent advice and services to a diversity of clients in a range of sectors, including Oil and Gas, Petrochemical, Chemical Process, Resources, Defence, Transport, Energy, Utility and Manufacturing. Clients include oil companies, mining companies, federal, state and local government, and major on-shore and off-shore construction companies.
AMOG Consulting’s Risk Management Services include:
- Formal Safety Assessments
- Hazard Identification including HAZID studies, Fault Tree Analysis (FTA), Failure Modes and Effects / Criticality (FMEA/FMECA) Analyses, Event Trees and Logic Diagrams
- HAZOP study and ”What If” scenario facilitation
- Safety Cases: development, implementation and review
- Quantitative and Qualitative Risk Assessments
- Demonstrating and Justifying ALARP
- Consequence Modelling: Fire, Blast, Smoke, Dispersion
- Independent Audits: MHF Safety Cases / Safety Reports, Safety Management Systems
- HSE Management Systems development
- Emergency Response Planning
- Project Risk Management
- Identifying, Assessing and Managing Critical Controls
- Human Factors Assessments and Organisational Risk Management
- Crisis Management
- Engineering Design Reviews including the use of Codes of Practice, Standards and Regulations
- Reliability, Availability and Maintainability (RAM) Assessments
- Accident / Incident Investigations
- Risk Software
- Training using in-house Training Modules
Contact:
| Dr. Adam Brumley Level 18, Central Park 152-158 St Georges Tce PERTH WA 6000 |
Tel: (08) 9481 0500 Fax: (08) 9288 4400 Email: amogper@amog.com.au |
| Dr. Andrew Potts Sea Technology House 19 Business Park Drive NOTTING HILL VIC 3168 |
Tel: (03) 9558 9077 Fax: (03) 9558 9880 Email: amogmel@amog.com.au |
Australasian Institute of Dangerous Goods Consultants
"Dangerous Goods - THE FACTS"
This FREE educational DVD explains the key issues for your business and where you can get the help you need. Order yours online now.
The Australasian Institute of Dangerous Goods Consultants (AIDGC) is an independent industry body that exists for the benefit of the dangerous goods industry, regulatory authorities, government, business and the general community. There are over 60 professional members who offer dangerous goods related services.
Our objective is to educate, promote, advise and consult on the safe storage and handling of dangerous goods. Since our establishment in 2001, we have built up a membership of consultants specialising in all classes of dangerous goods.
Our rigorous membership criteria mean you can be sure that all our members:
- Are dangerous goods storage and handling specialists
- Undertake ongoing professional development
- Agree and adhere to a strict code of ethical behaviour
- Have appropriate dangerous goods knowledge and demonstrated experience
- Understand the regulations relevant to their expertise
To find out more about the AIDGC, please visit www.aidgc.com.
Looking for a dangerous goods consultant? Current Queensland Members / Associate Members include:
| Dean Abella | (07) 5510 3281 | dean@abelaassociates.com.au |
| Janelle Adrain | (07) 3822 1417 | janelle.adrain@hse.com.au |
| Tim Dean | (07) 3510 4000 | t.dean@bassett.com.au |
| Tam Faragher | (07) 3854 2900 | tam@tfa.com.au |
| Peta Lywood | (07) 4664 1515 | plywood@bigpond.net.au |
| Frank Mendham | (07) 3510 4000 | f.mendham@bassett.com.au |
| David Moore | (07) 3854 2336 | david.moore@moorece.com.au |
| Rando Nicolosi | (07) 3854 2336 | rando.nicolosi@moorece.com.au |
Or search for an AIDGC consultant at www.aidgc.com/consultants.asp
Australian Safety and Learning Systems (ASLS)
Two options are provided by ASLS to assist organisations to comply with the Dangerous Goods Safety Management Act 2001:
- Consultancy and Auditing
- Training Courses: Dangerous Goods handling for operations staff, Dangerous Goods Management for Supervisors and Managers (client-specific training)
Contact: For further information visit the ASLS website at www.asls.com.au or phone 07 3285 8199.
CSM Safety Services Pty Ltd
CSM Safety Services Pty Ltd, providers of specialist services in the field of hazardous substances and dangerous goods management systems. We can provide your business with the following services:
- Compliance reviews and site audits
- Dangerous goods safety management systems
- Hazardous substances management systems
- Hazard identification and risk assessments
- Placarding guidance
- Manifest preparation
- Emergency response planning
CSM Safety Services Pty Ltd can also provide the following training:
- Introduction to hazardous substances in the workplace (0.5 day)
- Hazardous substances in the workplace (2 days)
- Dangerous Goods storage and handling (2 days)
Contact:
PO Box 4290
Kirwan, Qld, 4817
Ph: 07 4723 7652
Mobile: 0418 754 254
Email: craig.stewart@bigpond.com
Website: www.csmsafety.com.au
Dangerous Goods Equipment and Training Pty Ltd
Offers training, auditing and consultancy services covering industry's obligations under the Dangerous Goods Safety Management Act 2001.
After gaining an understanding of your company, a training package can be developed which meets your operational needs.
Contact: Ron Palmer, Phone: 3841 3155; Fax: 3841 0160; Mobile 04117 763 540
Website: www.dangerousgoodsequipment.com.au
Environmental Risk Solutions (ERS)
Environmental Risk Solutions Pty Ltd (ERS) is an Australian owned company which undertakes environmental, risk and safety assessment and training for a range of industries in accordance with relevant legislation. Services include:
- formal hazard identification and risk assessment;
- dangerous goods storage advice and design;
- emergency planning;
- auditing, including SMS auditing and DGSM Act compliance;
- integrated risk management system development;
- MHF Safety Report preparation;
- Hazard and Operability Studies (HAZOP);
- environmental services such as EIS and management plans;
- air and water quality and atmospheric dispersion modelling;
- industrial site remediation: - assessments, investigation and clearance; and
- training.
Contact: For further information contact Pauline Komoll on ph: 07 3842 3120 or email ersbris@ers.com.au
Website: www.ers.com.au
EPEE Consulting Services
Services Offered:
- EEHA Inspections (Greenfield and brownfield) – DoIR EEHA Auditor
- Hazardous Area Classification (vapours, gases and combustible dusts)
- EEHA installation design, design reviews and trouble shooting
- Conformity Assessments (formerly Statements of Opinion)
- Gas, Vapour and Combustible Dust Expert
- AS 4114 Spray Paint Booth Assessments
- AS 1940 Flammable and Combustible Liquid Storage Assessments
- AS 2022 Ammonia Installation Assessments
- AS 2927 Chlorine Installation Assessments
- AS 4289 Acetylene and Oxygen Installation Assessments
- AS 4332 Gas Cylinder Storage Assessments
- AS 1020 Static Hazard Assessments
- Hazardous Area Verification Dossiers (as required by AS/NZS 2381.1)
- On site training (not as yet VETEC approved)
- Other work on application
Contact:
Paul Spresser
DEIR EEHA Auditor (Cat 3) No.: 02/0093
Principal Consultant
EPEE Consulting Services Pty Ltd
http://www.epeeconsulting.websyte.com.au/
Unit 47/ 16 Arcadia Street
Eight Mile Plains Qld 4113
ph: (07) 3341 9553 m: 0415 340 477
ERM Risk
ERM Risk is the risk management consultancy arm of Environmental Resources Management (ERM). ERM Risk offers a range of courses in accordance with relevant legislation, including:
- hazard identification and hazard & operability (HAZOP) workshops;
- systematic risk assessments;
- development and audit of HSE management Systems;
- development of emergency response plans & procedures;
- minimisation of human contribution to accidents; and
- preparation of MHF safety reports.
ERM Risk also offers other services relevant to the onshore and offshore industries, such as formal safety assessments, reliability, availability and maintainability studies and safety integrity level (SIL) assessments.
Contact: Simon Meiers, Tel: +61 (0)2 8584 8888, Fax: +61 (0)2 8584 8800, e-mail: simon.meiers@erm.com
Website: www.erm.com/risk
Fire Industries Response Equipment and Services (FIRES)
FIRES provides a complete package of services in its FIRE Sentinel™ DGSMA package that are also available as individual modules. Some of the relevant elements are:
- Inspection & Audit Services
- Sourcing, procurement and pre-delivery testing of specialised hazard mitigation equipment
- System Commissioning
- Development of Hazard Mitigation System operation and documentation
- Response pre-planning, training and assistance
- Hazard mitigation equipment maintenance
- Dangerous Goods storage supply & leasing
Contact:
Michael Sorensen, Ph: 5573 2221; Fax: 5573 2774; Email: michael@fireindustries.com
Vernon Alcantra, Ph: 3264 8777; Fax: 3264 8737 Email: vernon@fireindustries.com
Haz-Stor Australia Pty Ltd
- Owner Manager Steve Davidson
- Trading since 1998
- ABN Number 79 090 676 887
- Workplace health and safety officer No 01864165
- Member of Safety Institute of Australia
- Manufacturers of Dangerous Goods Storage exterior relocatables from 200lt --- 60,000 lt
- Fully GALVANISED and powder coated --240-205lt drums or 60only 1000lt IBC Pallets
- Internal cabinets 15lt - 250lt classes 2, 3, 5, 6.1, 8, 9
- Specializing in classes 5.1 and 5.2 air-conditioned and temperature controlled units compliant with AS 1940--AS 3833---AS 2714
- Engineer designed and certified four (4) hour fire rated 240/240/240 internal safe storage of dangerous goods
- full range of racking and doors -plan1 zone 1 explosive proof lighting, full documentation supplied
- On site dangerous goods audits and advice local government regulations
Contact: Email info@haz-storaustralia.com.au Telephone 07 3341 6200
Kimberley Consultants
Kimberley Consultants is an Australian owned company based in Queensland which provides health and safety risk management consultancy services to many industry sectors including chemicals, mining, minerals processing, oil and gas, and manufacturing. Clients include those with currently operating or planned Major Hazard Facilities (MHF) and Large Dangerous Goods Locations (LDGL). Services provided by Kimberley Consultants include:
- Dangerous goods compliance to Australian Standards - advice and auditing
- Hazard identification studies
- Risk assessments
- Safety Case - development, implementation, review and auditing
- Safety Management Systems compliant with AS4801 – development, implementation, review and auditing
- Management system integration
- Compliance management
- Project risk management
Contact: For further information, please don’t hesitate to contact Joanne Flint on 0407 987 775 or joanne@kimberleyconsultants.com.au.
Website: www.kimberleyconsultants.com.au
Lloyd's Register - Safety and Risk
Lloyd’s Register is an independent risk management organisation providing risk analysis and risk mitigation solutions and management system certification around the world.
Lloyd’s Register personnel carry out both qualitative assessments and quantitative studies to suit customer’s specific needs.
Our services cover:
- Hazard identification (HAZOP, What If, Failure mode effect analysis, Fault tree analysis)
- Human error identification and management, including operator and maintenance error
- Human factors risk assessment, fatigue management
- Behaviour based safety programs
- Quantitative/Qualitative risk analysis
- Project risk management
- Safety cases
- Bow tie/layers of protection analysis assessments
- Fire safety analysis
- Ergonomics design guidance and review, control system interface design, alarm prioritisation
- RAM /SIL analysis
- Incident & accident analysis
- Expert witness
- Management Systems – development, auditing and training
Contact Lloyd's Register Safety & Risk on: s&r@lr.org or (02) 8354 0077 or visit our website at: www.lr.org
ModuSpec Australia Pty Ltd
ModuSpec provides services in the fields of risk management, technical surveys and engineering consultancy to a wide range of national and international markets. ModuSpec is focused on assisting clients to better manage their business risks. ModuSpec's experience and independence ensures the provision of impartial and objective advice.
Services provided by ModuSpec:
- Risk Assessments (Quantitative and Qualitative)
- Major Hazard Facility Safety Case / Report
- Land Use Planning
- Business Risk Management
- Management Systems
- Management System Audits
- Incident / Near Miss Investigations
- Training (Risk Management and Management Systems)
- Risk Assessment and Risk Management Software
If you would like more information regarding our services please do not hesitate to contact one of our offices.
MODUSPEC AUSTRALIA PTY. LTD.
Melbourne office
6th Floor, 34 Queen Street
Melbourne VIC 3000
AUSTRALIA
Tel. No : [61] 3 9614 1285
Fax No. : [61] 3 9614 3917
E-mail : australia@moduspec.com
MOXI / Skill + Learning
MOXI provides training, competency mapping and competency assessment to the oil and gas, mining, mineral processing and infrastructure industries – worldwide.
MOXI training falls into the following categories:
- Electrical Equipment for Hazardous Areas (EEHA) courses;
- Occupational Health and Safety courses;
- Technical Risk Management courses;
- Electrical courses; and
- E-learning courses for the oil and gas industry.
For further information contact:
Alison Leaning
Telephone: 1300 668 992 within Australia
Telephone: +61 8 9282 9300
Fax: +61 8 9282 9393
Email: enquiry@moxi.com.au
Website:www.moxi.com.au
National Safety Council of Australia Ltd (NSCA)
NSCA can provide training, consulting, auditing and advisory services to assist organisations to comply with the Dangerous Goods Safety Management Act 2001.
Courses Provided:
- Storage and Handling of Dangerous Goods
- Chemical Management
- Hazard identification and risk analysis for the process industries
Contact: For further information, or to obtain an enrolment form, please contact NSCA on 1800 655 510 or email qsafe@nsca.org.au
Noel Arnold and Associates Pty Ltd
Independent Training Providers and Consultants
Noel Arnold & Associates (NAA) provides risk management and occupational health and safety consulting services. NAA has offices based in Melbourne, Sydney and Brisbane. Key services provided by NAA include:
- Dangerous goods risk assessments;
- Chemical hazard and exposure assessments;
- Compliance audits in accordance with the relevant state legislation;
- Dangerous goods storage design review for building certification;
- Chemical storage facility design;
- Dangerous goods implementation;
- Development of manifests and registers;
- Development of Safe Management Systems; and
- Provision of a range of Dangerous Goods Training including how to manage the use, storage and disposal of chemical hazards.
Contact: For further information please contact:
Wade Russell – Queensland State Manager
4/301 Coronation Drive
Milton, QLD 4064
Tel: 07 3514 9222
Fax: 07 3514 9220
Email: brisbane@noel-arnold.com.au
Website: www.noel-arnold.com.au
Parsons Brinckerhoff
Parsons Brinckerhoff (PB) offers a range of services relevant to DGSM compliance. They include:
- auditing of dangerous goods safety management;
- hazard and risk analysis;
- hazard and operability studies;
- development of safety management systems, emergency plans, manifests; and
- design and development of preventative mitigation.
Contact: Michael Shepherd, Tel: +61 (0)7 3218 2222; email: mshepherd@pb.com.au
Website: www.pb.com.au and www.pbworld.com
PCT Engineers Pty Ltd
PCT Engineers offers assistance in many aspects of Major Hazard Facility management, including:
- Hazardous Area Classification (HAC) and EEHA Auditing - DUSTS, GASES and VAPOURS (ESO Accredited Auditors);
- Conformity assessments to Australian Standards for non-AUS Ex certified equipment;
- Control system trouble shooting, design and upgrades;
- Risk Identification, Assessment and Management;
- Safety Instrumented Systems (SIS) to IEC61511;
- Safety Integrity Level (SIL) verification;
- HAZOP, CHAZOP & HAZAN leadership services;
- Education and Training - Certified Functional Safety Expert (CFSE) & Hazardous Area competencies;
- Incident Investigation and reporting;
- Auditing of dangerous goods safety management;
- Hazard and risk analysis;
- Hazard and operability studies;
- Development of safety management systems, emergency plans, manifests; and
- Design and development of preventative mitigation.
Contact: For advice or information contact Keith Stamp by email at kstamp@pct.com.au
or by phone on (07) 3364 0200; fax (07) 3364 0202; mob: 0407 537 467or visit our website at: www.pct.com.au
Peta Lywood Dangerous Goods Consulting
Consulting in the area of dangerous goods and hazardous substances to assist organizations meet their obligations under the:
- QLD Dangerous Goods Safety Management Act and Regulations
- QLD Workplace Health & Safety Act and Regulations
Consulting services are provided to best suit the client's requirements and include:
- Preparation of LDGL Notification to CHEM services and Flammable & Combustible Liquid Licenses to QLD Local Governments;
- Audits of workplaces to determine their obligations under the above legislation;
- Review or preparation of concept designs for dangerous goods storage facilities in accordance with state legislation and Australian Standards;
- Assistance with building development applications and design documentation;
- Initiating and carrying out hazard identification and risk assessment programs in consultation with the client;
- Assistance with MSDS, Registers, Safety placarding and Emergency Services Manifests;
- Emergency plans and procedures;
- Safety Management Systems;
- Regularly traveling to regional areas of QLD and Northern NSW; and
- Able to work as part of a larger specialist project team or on an individual consulting basis.
Contact: For further information please contact Peta Lywood on Mobile: 0410 860 870 or by email peta.lywood@optusnet.com.au.
Plastics and Chemical Industries Association (PACIA)
Courses Provided:
PACIA conduct a range of courses on the management of hazardous substances and dangerous goods.
Contact: Jenny McLean on phone (03) 9429 0670, or fax (03) 9429 0690, or email jmclean@pacia.org.au
Website: www.pacia.org.au
QEST Consulting Group
QEST offers assistance in all aspects of a MHF Safety Report:
- Systematic Risk Assessment
- Emergency Plans and Procedures
- Safety Management Systems
- Education and Training
- Community Consultation
- Modifications
- Accidents and Near Misses
QEST also provides basic HAZOP and HAZOP Leaders training.
Contact: For advice or information contact Mark Swallow by email brisbane@qest.com.au or by phone on (07) 3211 9210.
Website: www.qest.com.au
Robert Jorgensen of RKEJ
Provides consulting services to assist organisations to comply with the Dangerous Goods Safety Management Act 2001. They carry out site audits, assist organisations to identify their obligations and help them to develop appropriate action plans.
Contact: Robert Jorgensen, RKEJ Pty Ltd, 2 Cranfield Street, Sunnybank Hills Qld 4109
Phone: 3344 4623; Fax: 3344 6775; Mobile: 0407 11 7343
Website: www.rkej.com.au
Safety Resource Centre
The Safety Resource Centre provides advice, support and training. Services include:
- Statutory Compliance Audits and Targeted Action Plans
- Hazard Identification and Risk Management systems and training
- Safety Management Systems
- Emergency Plans and Procedures
- Strategic Planning
- Change Management Support
- Executive Briefing Seminars
- Specialist advice in specific areas
Contact: For further information contact 1800 00 SAFE (or 1800 00 7233) or email to mail@safetycentre.com.au
Sherpa Consulting
Sherpa Consulting is an independent and highly skilled team of safety and risk engineers, based in Australia, with extensive industry experience in onshore and offshore oil and gas, chemical handling and processing, and critical infrastructure projects in South East Asia and Australia. Specifically, the team has completed Major Hazard Facility and Dangerous Goods support for operators throughout Australia.
Sherpa's aim is to deliver tailored HSE engineering and risk management services to our clients. Our technical capabilities are supported by continuous technical development, proprietary software, partnerships with world leading HSE Engineering 'think tanks' in the USA and UK, and an independent approach to doing business.
Examples of our range of services are:
- MHF support, including:
- Planning and strategy development
- Inherent safety
- Qualitative /quantitative risk assessment
- ALARP demonstration
- Development of Safety Critical Elements, Performance Standards and KPIs
- Verification of safeguards
- Safety report documentation
- Independent audits
- DG support
- Specialist Safety Studies, including:
- HAZOP
- CHAZOP
- SIL
- FMECA
- Consequence modeling
Contact Us
Stuart Chia, Director, Tel. +61 (0)2 9416 4555
stuart.chia@sherpaconsulting.com.au
Giles Peach, Director, Tel. +61 (0)2 9416 4555
giles.peach@sherpaconsulting.com.au
Further details may also be found on our website at www.sherpaconsulting.com
Simtars
Simtars provides consultancy-based services in dangerous goods and hazardous substances. These services include:
- Auditing of dangerous goods safety management;
- Exposure assessments;
- Hazard and risk analysis;
- Training in hazardous substances and dangerous goods management;
- Environmental assessment and impact;
- Development of safety management systems, emergency plans, manifests; and
- Design and development of risk mitigation strategies.
Contact: For further information visit the Simtars website at www.nrm.qld.gov.au/simtars or telephone 07 3810 6333
Sinclair Knight Merz
Sinclair Knight Merz is a leading project delivery firm providing engineers, scientists, planners, economists, architects, project managers and logisticians. We operate across five broad markets: Buildings & Property; Infrastructure; Power & Industry; Resources; and Water & Environment.
SKM is committed to the provision of quality risk management services, including dangerous goods services. Here is a broad snapshot of risk services available:
- Qualitative Risk
- Quantitative Risk
- Semi-Quantitative Risk
- Safety in Design
- Business Risk
- Management Systems
- Training Package Design and Delivery
- Incident Investigation
- Safety Case
- Mine Closure
Contact:
Hendrik Tait
Ph: +61 2 3244 7100
Email: htait@skm.com.au
Chris Beale
Ph: +61 2 3244 7100
Email: cbeale@skm.com.au
Website: http://www.skmconsulting.com/Markets/strategic_consulting/specialised_services/Risk_Management
TfA Project Group
TfA are consulting engineers who specialise in the design of flammable and combustible liquids storage and distribution facilities. We work extensively for all major Oil Companies and clients within the Mining Industry and Defence Force. We have designed Service Stations, Truck Stops, Oil Terminals and Blending Plants, Fuel Depots, Timber Treatment Facilities, Mining Refuelling and Workshop Lubrication Facilities and Aviation Hydrant System Refuelling Facilities.
TfA can assist with:
- Project Management
- Detailed Design of new facilities
- Construction Management
- Commissioning
- Compliance Reviews and Site Audits
- As Built P&ID documentation
- Hazardous Area Classification
- HAZOP Safety Reviews
Contact Details
Keith Sharp
Engineering Manager
Ph 07-3854-2924
Fax 07-3854-2999
Email: keith@tfa.com.au
Other languages